Your shopping bag is empty
Go to the shopAccessories - Kegging
duotight – 8mm (5/16”) Female x ¼" BSP Male Thread (With Seated O-Ring)
$5.95
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double...
duotight 6.35mm (¼") x 8mm (5/16") Female Reducer
$5.95
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double...
Duckbill Valve for Coupler 5/8 Inch
$4.95
Silicone 'duckbill' valve used in the gas inlet of keg couplers. This valve prevents pressure from being released from a commercial keg though the gas inlet. This is a spare part for Keg King keg couplers and may be compatible with other brands.
duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Female Joiner
$5.95
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double...
duotight - 9.5mm (3/8”) Female x 5/8” Female Thread
$6.95
Looking for high quality push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double...
Decal Holders
$9.95
These plated decal holders are literally made to support your brand name.Due to the novel two piece design the sliding base moves up and down allowing the decal holder to be fitted to ANY TAP design so there is no issues with incompatibility.For attachment the sliding base can be removed with a Philips head screwdriver so there is no need...
Cobra Dual Tap Font
$270.00
Features:- Dual Tap- Glycol Loop for use with glycol or water chiller- Made from cast brass with chrome plating- 5/8 inch female sockets for attaching shanks To attach a tap to these fonts you will either need the Stainless Short Shank without Barb or the KingLok Font Adaptor and KingLok Tap Shank Adaptor. It is also recommended to use the 8mm Compression Fittings...
Co2 Charger (mini)
$28.95
Mini Regulated C02 Charger with Guage - For 16g Bulbs Can also attach a Type 30 Nut Adaptor and MFL to barb fitting to run from a Co2 cylinder.
Chrome Plated Brass Tap Handle
$8.95
This tap handle is machined from solid brass bar. It's significantly heavier than the plastic tap handles and being chrome plated brass they are heavy duty. If you are wanting up upgrade from the plastic ones which come with the kegerator this is the tap handle for you. They look great on any of the chrome plated or stainless steel...
Silicone Faucet Plug
$1.95
These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. The plug is an economical solution for controlling fruit flies, yeast, and bacteria build-up when the faucet is not in use. The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is...
Black Phantom Single Tap Stainless Font Only
$49.95
The Black Phantom Single Tap Stainless Font is quality made 304 grade stainless steel font with a Matte Black finish.
duotight 9.5mm (3/8) x Ball Lock Disconnect - Liquid
$5.95
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made...
duotight 6.35mm (1/4) x Ball Lock Disconnect - (Black + Yellow Liquid)
$5.95
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made...
2 Inch Tri-Clover to 1/2 Female Thread (BSP)
$12.95
Perfect for any brewery build or wide range of fermenter parts that suit the 2inch tri-clover standard. These fittings are often used in the medical, food processing and other industries where high levels of cleanliness are required. This fitting includes a 2-inch Tri-Clover ferrule (OD 64mm) with a 1/2 inch BSP Female Thread. This 1/2 inch female thread is suitable...
duotight 6.35mm (1/4") x Ball Lock Disconnect (Grey + Red/Gas)
$5.95
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made...
Ultratap + Handle
$45.95
For the perfect pour, every pour, you need Ultratap. From the inventor for the original Vent Matic (Intertap) range of tap products comes the next generation design technology that will provide you with the ultimate laminar flow experience to date. Ultratap is the best way for your friends and customers to see your beverages being served with the most "wow...
Quadruple Tap Brushed Stainless Font Kit
$125.00
This duotight font kit includes: 1. Quadruple Tap - Brushed Stainless Steel Font Only2. 4 x duotight Compatible Short Shank3. 4 x Black Plastic Tap Handle4. Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.5. 4 x duotight 6.5mm x 8mm push in fittings to easily join the beer line...
Carbonation Keg Lid with 0.5 Micron Diffusion Stone
$55.95
The keg lid with built-in carbonation stone! The easiest way to carbonate your beer.Move the lid from keg to keg to carbonate as needed. This lid allows fast force carbonation with the minimum of effort.Features:- Stainless Steel 0.5 Micron Diffusion Stone- Keg Lid with Stainless Ball Lock Post- Silicon Keg Lid seal- 60cm of hose
Stainless Ball Lock Disconnect MFL
$11.95
These 304 grade stainless steel ball lock disconnects are exceptional quality and extremely reliable and robust. They are suitable for commercial applications or home brewers. *Please note that stainless steel disconnects disassemble by unscrewing the threaded portion of the disconnect body. They are supplied loose for inspection and cleaning purposes and should be tightened before using. Always check your connections...
Stainless Ball Lock Disconnect - Barb (Grey/Gas)
$11.95
These 304 grade stainless steel ball lock disconnects are exceptional quality and extremely reliable and robust. They are suitable for commercial applications or home brewers. *Please note that stainless steel disconnects disassemble by unscrewing the threaded portion of the disconnect body. They are supplied loose for inspection and cleaning purposes and should be tightened before using. Always check your connections...
Stainless Ball Lock Disconnect - Barb (Black/Liquid)
$11.95
These 304 grade stainless steel ball lock disconnects are exceptional quality and extremely reliable and robust. They are suitable for commercial applications or home brewers. *Please note that stainless steel disconnects disassemble by unscrewing the threaded portion of the disconnect body. They are supplied loose for inspection and cleaning purposes and should be tightened before using. Always check your connections...
Silicone Lid O-ring
$9.95
Silicone O-ring for Lids/Hatch suitable for Cornelius style KegsNote: may come in white or black
Pin Lock Disconnect - Liquid Barb
$9.95
These pin lock disconnects are the ones that fit onto Coca Cola Kegs. They are called pin lock disconnects because they interlock with the posts on the kegs using 2 or 3 pins. So to attach these to the kegs you push down and then twist the disconnect to engage the collet. The are less popular than ball lock fittings...
Camlock – Type E Male
$9.95
Using a Camlock is a quick way to connect to couplings for use on hoses, pipes, tubing etc and can be used with a wide variety of liquids.
Fermentasuauras Butterfly Dump Valve
$45.00
The new Keg King Fermentasuarus Dump Valve Upgrade is a massive improvement on the older dump valve assemblies. These easier to use, easier to disassemble valves now feature a 125% wider interior diameter, making for simple yeast removal and increased, non-clogging dryhopping capabilities from the collection bottle at the base of the valve. The valve housing now utilises recessed bolts...
Black Phantom Single Tap Stainless Font Kit
$62.95
The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator! This duotight font kit includes: Single Tap Black Punisher Stainless Font Only (includes gasket) 1 x duotight compatible Short...
1/2 Inch BSP Stainless Hex Nipple
$3.95
A hex nipple is a fitting that is constructed from a piece of pipe that has a hexagonal section in the middle used for a pipe wrench to fit onto and used to tighten or loosen. These Hex Nipples are great quality
Barb Manifold Gas Line Splitter with Check Valves (1/4" thread, 6mm Barb)
$20.95
These gas manifolds are rated to 100psi and include 3 gas line outputs and 3 x 1/4inch ball vales. This unit can be turned into a 4 way manifold by adding a 1/4 inch ball valve. You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly if you want to be able to easily disconnect/reconnect a gas...
0.5 Micron Stainless Steel Diffusion Stone/Air Stone
$9.95
This 0.5 micron diffusion stone can also be attached to the end of your "gas in" on your keg with 50cm of tubing to rapidly speed up carbonation. Ideal for use with our carbonation keg lids.CLEANING: This stone can be sanitised in boiling water and cleaned in a non-rinse sanitiser while running CO2 or air through the stone. If the pores...
Tube Brush
$9.90
These brushes are 8mm diameter and 76cm long so you can feed them into small diameter tube to clean it out.
Keg King Resin Tap Handles
$15.95
Add a bit of flair to your home bar with these Resin Tap handles. They come in a range of colours to suit your home, footy team or personal flair! Colours include: Black, White, Silver, Blue, Yellow, Green & Red
Double Ended Ball Lock Keg Post
$5.95
This double ended cornelius post does not have a spring / poppet. It just has a piece of bar that activates the ball lock disconnect wide open.This double ended post will only work with liquid Ball Lock posts. e.g. The Premium Ball Lock in Black MFL and Barb, the Machined and Cast Stainless Steel disconnects in barb and MFL.
1/4 in Ball Valve with Check Valve
$7.95
These ball valves include a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Should only be used with gas, not beer.The manifolds we sell all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing...
1 Way Check Valve with Brass Barbs
$10.95
This handy device will ensure you protect your regulator against reversal of flow in your lines. This one way check valve with brass barbs will suit several different gas lines irrespective of the outside diameter (OD) The diameter of the barbs are 6mm. These will also push straight into our gas line splitters.